See how to make your own Spot Welder. Handy if you are making battery packs with 18650 lithium ion batteries. I use a timer to control how much time current is passed through the welding pen and make a handheld momentary trigger to control the electronics. This welder is deisgned to work with automotive or garden 12V batteries and is easy to put together and use!
Visit our Amazon storefront to see what tools and materials I use in most of my projects:
https://www.amazon.com/shop/josesextr...
This helps support our channel as we earn commissions from sales.
Link to Welder electrical schematic https://bit.ly/2WJziPo
Below are affiliate links to parts I used in this project:
Starter Relay: https://amzn.to/3bC5ZEX
Timer Circuit: https://amzn.to/2S5277u
8 Gauge Cable https://amzn.to/3awOGDL
Terminal lugs https://amzn.to/3bw7Z1k
Momentary Switch https://amzn.to/3aEcci5
You can read the written version of this article here: https://bit.ly/2Wp1EzJ
Complete Instructions on the Drok Time Delay Module: • Programmable triggered timing board 3...
Closeup Wiring #1 https://bit.ly/2MVl7Cy
Closeup Wiring #2 https://bit.ly/2HIqS7i
Here's a correction provided by a viewer. I should know better considering I've been in IT for over 40 years:
0.01s = 10ms = 1/100s
0.001s = 1ms = 1/1000s
#batterypack
#lithiumionbattery
#spotwelder
0:00 Introduction
0:23 Materials Used in Project
1:46 Mounting the Relay and Timer Circuit
2:06 Crimping the lugs and connectors
3:47 Making a Trigger
6:02 Wiring the Timing Board
7:45 Programming the Timing Circuit Board
8:54 Wiring Diagram Schematic
9:08 Overview of the Wiring
10:45 Testing the Spot Welder
12:37 Wrapup