Prevent damage to your power steering pump backplate by properly installing the pulley.

Instructions:
1) Lubricate the pump shaft with an extreme pressure lubricant (0:57)
**This will decrease the amount of pressure needed to press the pulley into place (1:00)
2)Ensure the pulley is clean of any debris or damage (1:05)
3) Lightly lubricate the shaft bore (1:09)
4) Put the pulley on the shaft and thread the power steering pulley tool onto the shaft (1:11)
**It's important to make sure that the pulley is on straight before applying any load (1:15)
5) Using a large wrench, turn the installation nut clockwise until the pulley is tightened in place (1:19)
6) Remove the tool and you're finished (1:25)

Was this video helpful? If so, make sure to like it, and be sure to subscribe to our channel.

Enter your best auto repair video for a chance to win $5,000! (ends 7/17/19) https://videocontest.cardone.com
Bought a Cardone part recently? Use your receipt to enter to win a 1977 Pontiac Trans Am Firebird! (Ends 7/31/19) https://cardonehotrodgiveaway.com/

Stay connected for more updates and tips:
Facebook:   / cardoneindustries  
Twitter:   / cardoneparts  
Instagram:   / cardoneindustries  
Website: http://cardone.com/
For more technical bulletins click here: http://cardone.com/techhelp/

*Disclaimer*
At CARDONE we cannot guarantee against improper interpretation or application of the information we present in this video. You should always follow the enclosed safety guidelines, consult your OE repair manual for correct specifications when performing any install or repair procedure. Any injury, damage or loss that may result from improper use of tools, equipment, or from the information contained in this video is the sole responsibility of the user, and not of CARDONE Industries.