How to install and PLASTERBOARD Ceiling SAW Profiles
   •  How to install and  PLASTERBOARD Ce...  

In this video I will show you how to mount a plasterboard ceiling and you will be able to see a trick to avoid grazing the joint, where the drop ceiling and the straight ceiling meet.

Let's go with the basic materials.
We start with the plates.
Within the plates there are with different components where they give different shades of color to the visible part to recognize it. There are different sizes and thicknesses depending on the work you want to do.

These plates are composed of a plaster core with additives and covered on both sides with a cellulose sheet. Its manufacture is carried out through a continuous lamination process and according to the standard.
They have a visible face depending on the type of plate you need, it can be cream, green, pink, blue, yellow that allows any final finish. The hidden face usually has a brownish hue. To facilitate the treatment of joints, the longitudinal edges are tapered. The transverse edges are cut. But there is also a type of plate on the market that has all the sharpened edges.

Then we have the profile.
Which are galvanized steel profiles of the type dX51D and galvanized Z140 or Z275 that make up the framework of the loadbearing structure of the partition, lining and ceiling systems. Z140 galvanizing is for a nonaggressive indoor environment with light to medium permanent humidity. For areas with an aggressive environment, it would be the profiles with a galvanized Z450.

In ceilings, the most commonly used profiles are CD 60 masters, f47 masters, omega 70 masters and omega 80 masters.
Then we have the SR saw profile that is to hook the CD60 and f47 masters.
For the perimeter, the U 30/30 profile is usually used, the Clip 18 profile is also called the U 18 profile and the angular profile.