In this episode, I recovered the seat of my CB750 project bike. I am building this bike to be a roadgoing runner, not a full restoration. The bike is a bitsa, and didn’t come with a seat when I first got it. I bought the seat that I am restoring from a large national breaker. I knew that it would require recovering, but it turned out to be a little worse than I expected.
Here's what I used in this video:
Rust converter: https://ebay.us/7scnRS
Seat cover: https://ebay.us/CYT7AM
I only intended to recover the seat, but when took the cover off, and removed the seat foam I found that the seat pan was very rusty. Although it looked quite bad, it was all surface rusty, but very crusty.
I decided to treat the rust with a rust converter, then paint it with some twopack paint so that the rust wouldn’t easily recur. It came out quite well in the end. Certainly not a concours finish, but it should be serviceable for another few decades.
For more helpful howto guides and restoration project logs, visit our blog: https://www.spannerrash.com/
As an Amazon Associate, Ebay Partner and Awin Affiliate, we earn a small commission from qualifying purchases. Some of our links are affiliate links, and if you decide to purchase things through them, we earn a small commission. It costs you nothing but helps us to keep the content coming. Thanks for your support!