Easy to follow stepbystep guide on how to basically replace you whole front end. This is a big job that is tedious, but I believe most DIYers can do it but as always, if you feel uncomfortable at any point please send your car out to your trusted mechanic! If you have any questions, leave them in the comments below and I'll try my best to get back to you when I can.

Tools Used:
Two different type pry bars.
Bottle jack.
Rubber mallet.
3lbs sledgehammer.
1/2in impact gun.
17mm socket.
18mm socket.
19mm socket.
22mm socket
30mm socket (12 point).
3/8in impact gun.
Two different strength 3/8in electric ratchet.
12mm socket.
Two different length 14mm socket.
17mm socket.
1/4in. impact gun.
1/4in standard ratchet.
Two different length 1/4in extensions.
10mm socket.
14mm & 17mm wrench.
18mm wrench.
19mm wrench.
22mm wrench
A Lunch.
Ceramic grease.
Anti seize.

Parts Used:
Lower control arm (right/driver's side).
Axel.
Loaded struts.

As always make sure you subscribe, give me the thumbs up, and share with your friends & family! Thanks for watching, aloha!