We believe that we did this the easiest way. If you are LS swapping your 8898 Chevy truck and it is an original V8 truck then you're good to go. If you have a V6 truck, you need to switch your stock mounts on your frame out for the V8 mounts that go on that same truck.

Tools you'll need:
24mm socket and wrench. You can make due with crescent wrenches if that is all you have.
15mm deep socket if you remove the top shock bolt.
15mm wrench to stick inside the frame to hold the mount nuts while you loosen the bolt up top with your 15mm of choice.
A floor jack, or two if you have more than one it may be easier.
Jack stands to hold the truck up while the front wheels are off.
Lastly we suggest having a helper. This makes taking the mount hardware off much easier and aligning the control arm back into its spot.

If you'd like to see more on our LS swap build on our 95 Chevy truck, check out the channel and subscribe to keep up as we move forward on the build.