Make sure the engine is up to operating temperature before syncing the carbs. The Clymer manual says the gauge readings should be within 40mm (1.6 in HG) or less. If not, then adjustment is required. It will take some time to get it perfect. Adjust a little, blip the throttle a couple of times and let it stabilize, repeat if necessary. You will probably be adjusting the idle during this procedure. Clymer manual states the idle rpm should be 800rpm plus or minus 80rpm. I hope this video is helpful and you get your Goldwing synced to perfection! Please consider subscribing, Thanks for watching!

Morgan Carbtunehttps://amzn.to/4bDq5gs


DISCLAIMER I am not paid or endorsed by anyone mentioned in the video. I do believe in spreading the word on good products and dealers to help the consumer. I do not claim to be a mechanic. If you decide to do any mods that I have done it will be at your own risk and I will not be held liable. Also, all content is my opinions only and not considered as advice, please do your own research.
The reuse of this video without written permission of the owner is not allowed.