We found this rusty pulley in an old barn, and decided to restore it back to life. Check out this amazing restoration transformation!

Chapters:
00:00 Intro
00:08 Label removal
00:37 Disassemble pulley
03:16 Soak in vinegar
03:43 Remove rust with wire brush
05:17 Clean with wire wheel
05:50 Spray paint pieces
06:31 Reassemble
09:23 Final product
09:36 Meet Hetty :)

The Process:
The pulley was so rusty, so we started by splitting it down to individual pieces. We then used some white vinegar and salt to create an acidic solution, and soaked each part for 24 hours. Once we took them out
the rust was easy to brush off, and we started the cleaning process. Each piece was stripped back to bare metal, ready to be painted.
Red and Black was our colour scheme. We spray painted each of the parts before reassembling the pulley, and oiling up the moving parts. This restoration took us roughly a week. Mostly due to having to repaint every part!

Thanks for checking out our video Make sure to subscribe for more!

=== Follow ===
Twitter   / treetopresto  
Instagram   / treetoprestorations  
TikTok   / treetoprestorations