JBL Flip 6 Full Teardown and Sound Test

Hello everyone, in this video I will be fully disassembling the Speaker, then putting it back together while playing some music, I will also connect it to some external speakers to see if the amp is capable of running a bogger speaker which seems to be the case for every JBL speaker I've reviewed. I have noticed a few things: So while doing this I have noticed a few things:

Buy JBL Flip 6 from:

Amazon: https://geni.us/I4tQB
JBL.com : https://uk.jbl.com/speakers/FLIP6.h...

Advantages
+ The amp was capable of running a 4" and 5" Drivers and produce deep bass.
+ The rubber seals for waterproofing were a great idea providing easy removal and replacement if required.
+ The main drive seem is larger than the flip 5 and they have used all space available to mount it, this is great as its providing low frequency and deeper bass
+ The passive radiators were very flexible and could extend to a maximum stretch without breaking.

Disadvantages:
The tweeter doesn't seem to provide any noticeable advantage compared to the Flip 5.
The crossover is set at 4Khz (Not sure if this is right as the speaker performance in that range seem less accurate compared to the older Flip 5)
Some Wires were permanently fixed to the PCB using some terminals.
The Bluetooth aerial was hard to remove as the connection was below the PCB so had to peal it off to be able to remove the Main board.

Disassembly Difficulty Score: 6/10

Chapters:

00:00 Intro
04:50 Crossover Frequency check
07:10 External Speaker Test
18:39 Battery Removal
24:15 Main Board and DAC
29:45 Reassembly
48:55 Sound test (testing all is fine)