Within just a couple weeks I was able to turn an auction deal into a fully functional and "likenew" snowblower. There was A LOT of work that I got done behind the scenes, but I think in the end it's totally worth it!
This snowblower had seized bearings, wear and tear all over and many damaged areas. With a little bit of effort, I got everything straightened out and I made sure to check all the clearances within the drive mechanism.
The snowblower auger is now tight to the drive shaft and there is zero play between the brackets, thanks to the drillrod pins I made.

With a fully functional John Deere 47" Snowblower, I should be able to mount this onto the tractor in the near future before the snow arrives...and then I'll be all set for some awesome snow removal.

Hoodies & TShirts (Merch Store)
https://workshoprebuild.creatorspri...

⬇Products⬇
Eccentric Bearings SA20516 (Order via EMail without ReLube capability): https://bit.ly/3RIX7Sy

Seals for 3 Way Gearbox:
2x: Double Lip ID: 1.25" x OD: 2.440" x W: 0.310"
1x: Double Lip ID: 1.00" x OD: 2.441" x W: 0.375"

Seals for 2 Way Gearbox:
2x: Double Lip ID: 1.00" OD: 2.00" W: 0.250"

Drill Rod For Custom Pins: https://amzn.to/3BuAsE5
Key Stock assortment: https://amzn.to/3xdbxlT
Permatex Ultra Black Gasket Maker: https://amzn.to/3B7v88r
Lubriplate Assembly Grease: https://amzn.to/3d75bhm
Loctite: https://amzn.to/3DeVZlp
Teflon Tape: https://amzn.to/3RAxy6n
________________________________________________________________________
_
This snowblower also fits: John Deere 655, John Deere 755, John Deere 955
The John Deere 59" hydro cut snowblower is the same as this model, just wider!


Watch My Previous Rebuilds:
4: https://bit.ly/3unVNfg
:https://bit.ly/3BbuWDz
:https://bit.ly/3wHy2x5
: http://bit.ly/2NOLvlp
/ : http://bit.ly/3bvXLzd
: http://bit.ly/3pDTBKM
/ : http://bit.ly/3bKGra3
: http://bit.ly/37EDeaD

EMail: [email protected]

Music: https://share.epidemicsound.com/v6woxm

#snowblower #johndeere #johndeeretractor

Timestamps:
00:00 John deere Snowblower Intro
00:30 Parts Overview
07:55 Snowblower Gearbox Assembly
10:20 47" Snowblower Auger Assembly
12:47 Tightening Eccentric Locking Collar Bearings (Spherical)
15:22 47" Snowblower External Parts Assembly
20:17 Snowblower Mounting Hardware
26:02 Quick Attach Pins
30:14 Final Words