www.kaniwaba.com

Carefully designed Pedal Kit for the Talaria Sting R MX4.  


What YOU get:

Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions! 
The TALARIA Sting Power Pedal Kit V3.0 plus the Electronic Pedal Assist for Talaria R MX4 Upgrade.
This pedal kit WILL propel your ebike both mechanically and electronically.  You get a carefully designed sprocket set to install on the gearbox's output shaft WITHOUT UNINSTALLING IT, a high quality freewheel with hub, a 36 link bicycle chain with master link so you can easily install on uninstall, a 3 position switch, a controller, and a cadence sensor with fixing bracket!   
Cadence sensor to detect pedal speed.
Three Position Handlebar Switch: Throttle only, pedals only or both (greater speed between pedals and throttle), the system will compare and transmit to the controller the higher speed.
Compatible with chain or belt drives
A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved!
Compatible with chain or belt drives
Chain guard must be removed
Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit.  
Easy setup.  Adjust the kit to your bike using the stainless steel collars.  You may easily change between pedals or footpegs (and you have two footpeg positions!).  Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose!
Maintenance free.  New design is maintenance free since it has sealed cartridge bearings.
Brace bar.  Also works as a brace bar
Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible.
Aluminium made in order to reduce weight.  With a weight of around 4.3 Lb (2.0 kg).  The spindle is made of stainless steel.
Durable Materials. Parts made of aluminum and stainless steel.  It will last a long time. 
OEM Look.  Discrete installation, all cables hidden! 
Propels the bike using the bike's battery.
* With original sprocket, original controller, and flat road.

Cranks not included in this version unless added.

Pedals not included in this version unless added.