With the world’s current volatility and market instability I highly recommend you get some storable food for yourself and your family.  It never hurts to be prepared for an emergency before it comes.  I get mine from the largest and most trusted source in the market.  Click the link below and take a look for yourself.  
https://mypatriotsupply.com/?rfsn=611...







This video contains information on how my magnetic switch motor works and how it’s constructed.



Some of the specifics are as follows:



I used four N52 neodymium magnets in this video. They are .05 x 1 inch in size. I stacked them to form two 1 x 1inch cylinders.



The 2 metal bars I used in the rotor are 6 x 1 inch.



The shielding material is from CONETIC. There are three sheets, which are each 8 x 5 inches. The holes are 1inch diameter, with a 3inch space between them, centered in the metal sheets.


This design would have a much better chance of working consistently with square magnets with at least 400 lbs of magnetic hold force, low friction bearings, and a leverage bar triggering the switching of the shielding slider.


The Key to building a Magnetic Motor:

   • The Key to building a Magnetic Motor