Dino’s Tinker Shed, S3 Ep14, Making a DIY motorcycle wheel balancer.
In this episode, I will show you how I constructed my homemade motorcycle wheel balancer to balance the front tire on my Suzuki Dr650. The balancer is a simple construction and something most DIYers should be able to handle with some basic hand tools and some patience.
Overall I spent around $30 Canadian not including the ¾” plywood scraps I had laying around the shop.
I will show you the actual balancing in a follow up video in the nottoodistant future.
As always, I have included time code chapters so you can skip around the video as you see fit.
Moto Dans YouTube channel:
@MOTODANS
Moto Dans Wheel Balancer:
   • Diy Custom Motorcycle Wheel Balancer  

TIME CODE CHAPTERS:
00:00 Cold opening
01:02 Introduction
01:22 Overview
03:14 Moto Dans
04:13 Parts list
05:24 Modifying the straps.
05:35 Bearings
06:08 Mounting the bearings.
07:36 Wood forks
08:11 Laying out the bearing assembly
09:30 attaching the bearings.
10:06 Metal bracket installation
10:43 Base plate
11:35 Leveling system
14:44 Installing threaded wood inserts.
15:31 My father in law
16:26 Installing the bolts and brackets
17:21 Mounting the forks
18:22 About the axle
20:07 Summary
MUSIC:
Country Cue 1 by Audionautix is licensed under a Creative Commons Attribution 4.0 licence. https://creativecommons.org/licenses/...
Artist: http://audionautix.com/'>http://audionautix.com/
Delusion 32 by Audionautix is licensed under a Creative Commons Attribution 4.0 licence. https://creativecommons.org/licenses/...

Artist: http://audionautix.com/'>http://audionautix.com/