Today I will show you how I make some acrylic parts for Martin from Wintergatan and his Marble Machine X project. That was also a new experience for me because I didn't made something out of acrylic glass before. I'm really happy how this turned out.
I hope you will like this video and you will visit my channel again!
Speed and feeds I used:
Roughing 1 flute 6mm straight endmill
Spindle speed: 15000 rpm
Feedrate: 1650 mm/min (65 in/min)
Feed per tooth: 0,11mm (0,00433 in)
Finishing 1 flute 6mm straight endmill
Spindle speed: 15000 rpm
Feedrate: 900 mm/min (35 in/min)
Feed per tooth: 0,06mm (0,00236 in)
2 flute 8mm ballnose endmill
Spindle speed: 15000 rpm
Feedrate: 3000 mm/min (118 in/min)
Feed per tooth: 0,1mm (0,00393 in)
Here Martin gets these parts:
• Marble Conveyor Belt 2.0 Marble Mac...
Here is the link to Martin's awesome channel!
/ wintergatan2000
Music credits:
Wintergatan Sandviken Stradivarius