This time I'm going to walk you through installing the machine and post processor files in Fusion, how to update the firmware and MOS on the Milo, and show it making some chips!

00:00 Introduction
00:57 Installing machine definition and post processor
02:50 Walk through operations
07:33 Post process and export gcode
09:14 Update firmware and MOS
11:38 Upload gcode to RRF
13:13 Configure MOS (WCS, touch probe)
21:53 Start cutting!

The firmware can be downloaded from https://github.com/MillenniumMachines...

The Millennium Machines Discord server:   / discord  

The touchprobe I use: https://www.aliexpress.us/item/325680...

Some helpful files and info can be found at https://github.com/West3DPrinting/Milo

Some of the products mentioned in the video series:
Milo kits: https://collabs.shop/v44vxx
Ambrosia ABS: https://collabs.shop/zfijfr
Ambrosia Galactic ASA: https://collabs.shop/upopnd
VLMP: https://collabs.shop/bgqwcv
Mean Well 5v PSU: https://collabs.shop/s6rvip
Never Grow Up Ruler: https://collabs.shop/13tg8s

Use the code WEST3DPRINTING to get 5% off your order (Limited to one use per customer)!