This guide will show you how to disassemble the back fender on the NIU KQi2 Pro. It will also show you how to get to the rear axle nuts and motor wire in order to remove the back tyre.

First you will need to follow the disassembly guide to get into the deck:    • NIU KQi2 Pro Electric Scooter disasse...  

Secondly here is a guide that will show you how to disconnect the wires from the controller:    • NIU KQi2 Controller and Battery Repla...  

To remove the back fender you only need to disconnect the battery wire and the back light wire.

If you have any questions feel free to ask in the comments. If you found the video helpful please hit the Like button and Subscribe to my channel for more electric scooter content.

NOTE: If your scooter is still under warranty consult NIU support before doing any DIY repairs.
If you don’t have scooter repair experience and don’t own the needed tools, I would recommend you to get the scooter repaired by a qualified scooter technician.

Tools used for the disassembly:
Screwdriver bit:
Allen #4 and #5

Chapters:
0:00 Introduction and Overview
2:11 Removing the Bottom Plastic Panel
3:46 Look at the Wiring and Rubber Gaskets
7:19 Removing the Back Fender


#NIU #electricscooter #NIUkqi2pro