This demo shows how to build an Arduinobased clock, temperature, and alarm using SSD1306 OLED(128x64 ) + RealTime Clock (RTC) + three Pushbuttons.
Parts Required
Arduino Nano Board x 1
DS3231 Real Time Clock Module x 1
I2C OLED Display Module x1
5V Active buzzer x 1
Tactile Push Button Switch x 3
Jumper wires (as required)
Breadboard x1
Libraries: Adafruit_GFX.h and Adafruit_SSD1306
For more videos, please visit my YouTube channel: FWD Skill Zone
Arduino RGB LED Control Part 1 • Arduino RGB LED Control Part 1
Arduino RGB LED Control Part 2 • Arduino RGB LED Control Part 2
Short Range Radar System MaxSonar [የአጭር ርቀት ራዳር ሥርአት] • Short Range Radar System MaxSonar [...
FK MATLAB Deep Learning Part 1 • FK MATLAB Deep Learning Part 1
FK MATLAB Deep Learning Part 2: Transfer Learning • FK MATLAB Deep Learning Part 2: Trans...
Nitinol Shape Memory Spring • Nitinol Shape Memory Spring
VoiceActivated Robotic Arm Shero [ በድምጽ የሚሰራ ሮቦቲክ አርም ] • VoiceActivated Robotic Arm Shero [ ...