https://forum.onefinitycnc.com/t/onef...

How to maintain your Onefinity CNC
Things you'll need:
3 in 1 oil : https://amzn.to/3bsFxi3
Metric Hex Key Wrench : https://amzn.to/3aHpxcS
A few old rags/towels.

After Ever carve/project:
Vacuum up all dust and chips.

After every 23 hours of operation:
Vacuum up all dust and chips. Use compressed air to blow off dust and debris from the rails and ball screws.

Every 14 weeks (or around every 200300 hours of use):
Apply 3 in one oil into the oil ports of the ball screws. Jog the machine to it's x,y,z limits while applying oil to the ports in a few different locations. Wipe off any excess oil using a lint free cloth. Note: Cover your waste board with cloths or paper towels as the oil may drip.

For more information, please check out the user manual: https://forum.onefinitycnc.com/t/onef...

https://www.onefinitycnc.com
https://forum.onefinitycnc.com