Hi folks

Thank you for watching this video and don't forget to subscribe so you don't miss anything (it's free but it helps content creators a lot)

If you want to help me to expand my squadron or buy a specific plane to review, you can help me by making a small donation via my PayPal link https://www.paypal.me/arthurjanin?loc...'>https://www.paypal.me/arthurjanin?loc...

Thank you very much in advance my friends





Salut les copains

Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus)

Si vous voulez m’aider à agrandir mon escadron ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal https://www.paypal.me/arthurjanin?loc...'>https://www.paypal.me/arthurjanin?loc...

Merci beaucoup beaucoup d’avance les amis




Follow me on Instagram :   / arthuraerorc  
⏰ TikTok : https://vm.tiktok.com/ZMNYCqUhC/


You can buy my things here ⬇

Jeti Rx and DS16 ➡ https://www.opaleparamodels.com/fr/ ‪@OpaleParamodels‬
CNHL LiPo ➡ https://chinahobbyline.com/?ref=I5Ew9...
✈ Jets and more ➡ https://www.turbinesrc.com/fr/?aff=4



0:00 Presentation (LiPo placement CNHL 6S 5000 830gr)
2:33 Takeoff on its own !
2:42 Trimming
3:12 Gyro ON because of turbulences
3:24 CG TESTS (nose heavy)
4:06 Flyby and rates check
4:38 Full power pass to break
5:02 Full flaps
5:23 Stall test
5:59 Slow pass
6:37 Landing with crosswind
7:12 4m22 flight (3m26 motor) : 3.87v after few minutes of cooling
7:42 First thoughts
8:30 THANKS for SUBSCRIBING
8:47 Photos + LiPo placements



Freewing Messerschmitt Me262 "7 Yellow" V2 Twin 70mm EDF Jet High Performance https://www.turbinesrc.com/fr/jetse...

Specifications :
Wingspan 1500mm, length 1280mm, weight without LiPo 2570gr!
⚖ with HRB 4000 60C 3155gr / CNHL 4000 70C 3240g / with HRB 5000 50C 3315gr / with CNHL 5000 70C 3400g

29522100Kv brushless inrunner motors
EDF métal 12 blades with ESC 60A hobbyWing, Internal SBEC, EC5 connector

Speed : 165kmh

❌ Book’s CG 100110mm but maiden at 113mm and it’s nose heavy but 118mm is way better (can’t put LiPo any further aft…)

CG 118mm :
CNHL 4000 70C (690gr) (all the way back)
HRB 5000 50C (745gr) (all the way back)
HRB 4000 60C (585gr) (see photo)

CG 113mm (nose heavy):
CNHL 5000 70C (830gr) (all the way back)



My rates (high/mid/low) :
Aileron 22/15/15mm
Elevator ‪18/15/10‬mm
Rudder 28/20/15mm
Flaps (outer flap) 20/30mm with up 10% (1.5mm) elevator compensation


⏰ Flights with timers and voltage (checked few minutes after landing on cell meter):
1st (filmed), CG113mm: CNHL 6S 5000 70C : 4m22 flight (3m26 motor) 3.87v
2nd (filmed), CG118mm: CNHL 6S 4000 70C : 3m51 flight (2m53 motor) 3.83v
3rd, CG118mm: HRB 6S 5000 50C : 3m42 flight (2m53 motor) 3.85v






#maiden #rcplane #freewing #jet #jeti #opale #radiocontrol #setup #modellbau #me262 #eflite #new #warbird #perfect #foam #crash