Personalized Coins on a 100w MOPA Fiber Laser

Coins are one of the main products that I make on the fiber laser. With the recent addition of the 100w MOPA Fiber from ‪@omtechlaser‬ it has taken some time and testing to dial in new settings to match all that power!
These are the settings that work In my two machines but that is not a guarantee that they will work for you. TEST AND TEST AGAIN!

Lightburn Course
Course.beardedbuildsco.com/store

Affiliate links below ⤵

OMTECH DISCOUNT CODE:
BEARDEDBUILDS5OFF

100w MOPA Fiber
https://omtechlaser.com/products/mp69...

Fiber Marker Collection
https://omtechlaser.com/collections/f...

OMTECH SITE
https://omtechlaser.com?sca_ref=2167968.zbMLZYkgQK

Coin Suppliers:
https://swissbui.com/
https://limitlesssolutions.org.uk/
https://laserableitems.com/

100w MOPA
ENGRAVE
Speed 1000mm/s
Frequency 20hz
Power 95%
Line interval .05 line interval
6 passes with cross hatch

CLEAN
Speed 2000mm/s
Frequency 200hz
Power 30%
Line interval .025 line interval
1 pass with cross hatch

BLACK
Speed 500mm/s
Frequency 200hz
Power 95%
QPulse Width 20ns
Line interval .05 line interval
1 pass no cross hatch

30W Fiber
ENGRAVE
Speed 500mm/s
Frequency 30hz
Power 95%
Line interval .025 line interval
12 passes

CLEAN
Speed 2000mm/s
Frequency 60hz
Power 40%
Line interval .025 line interval
3 pass

BLACK
Speed 50mm/s
Frequency 35hz
Power 35%
Line interval .025 line interval
2 passes