It took a while to finally get some air in the tanks. I finally got my compressor to sorta work. The first test of the Pneubike motorcycle showed promising results, even moving with as little as 10 psi, but was cut short by a failing regulator that was making noises, leaking, and topping out at only 80 psi. The system has a safety release valve set at 200 psi, so really needs a better regulator and a smaller sprocket on the rear wheel to find the true top speed. Please help finance a new regulator so this motorcycle can run again. This is all nonproprietary information, and you are more than welcome to build your own. To find the plans for the rotary sequence valve I open sourced or if you want to link up on Patreon, or Facebook, go to Pneubike.com
Thanks for following and sharing!