What happens if you don't have enough solar power while off grid? We use a generator to get us through the cloudy and stormy stretches in the winter. Usually this means passing the generator power through the inverter to the loads. But, there is another way. This is a review of the new 100 Amp charger from Signature Solar. They call it the Chargeverter.
The Chargeverter5000 is a 5kW AC charger that can recharge most 48V batteries up to 100 Amps. It has a builtin circuit breaker on the battery side, DC. The AC cord comes prewired with a NEMA L1430 plug. Most generators that have 120/240V will have this style outlet on them.
In the video I'm using a Honda EU6500 inverter generator running on gasoline. However, this charger can use almost any generator because it can be set to the maximum Amps. The AC input will also work with 120V. If you want to set this up as 120V, then you will probably want to change an adaptor to a 120V plug.
If you decide to make a purchase from Signature Solar, please consider using one of my affiliate links below. That won't cost you any more, but it does help out the channel.
Previous video running generator through inverter: • Generator and Schneider settings and ...
00:00 Intro
00:58 Unboxing new Charger
03:00 Teardown, look inside Chargeverter
05:28 Mounting charger on wall
07:15 Idle Consumption of unit, using Victron Smart Shunt
08:14 Generator Start and plugging in
09:07 100 Amps, it works!
10:12 Temperature checks, how hot is it?
11:45 Calculating the ideal current, Amps, setting
13:38 Conclusion
Thanks for watching.
Signature Solar Affiliate Links:
100 Amp battery charger: https://signaturesolar.com/eg4charge...
Schneider XW PRO inverter: https://signaturesolar.com/schneider...
Battery, 48V (51.2V) 100Ah, EG4LiFePower4: https://signaturesolar.com/eg4lifepo...
Disclaimer:
Products in video may have been provided to David Poz, LLC at no cost for the purpose of the review. All views and opinions expressed are that of David Poz, LLC.
My videos are in no way intended to be instructional "howto" lessons. I am simply documenting my project for informational purposes. Property damage, personal injury, or death may result, even when following manufacturer's instructions. I cannot be held liable for such damage or injury. It is YOUR OBLIGATION to ensure that you are complying with any local and federal laws as well as code and permit requirements.
David Poz, LLC