I made a custom white PS5 with light up buttons and logo. I also changed the orange standby light to blue. Matte white vinyl wrapped PS5, modified front buttons, and back lit PS Logo.
.........................................................
Subscribe & check out my other tech restoration and mod videos!

Follow me on Instagram:   / restoretechnique  
Buy Me a Coffee : https://www.buymeacoffee.com/restoretech

Filmed on: Samsung S10e

Back lit logo mod idea credit to:    / mymatevince  

Music:
Select Patrick Patrikios
jazzyfrenchy https://www.bensound.com

If the following Tools and Parts lists helped you, please considering leaving a comment :)
(not affiliate links)
Parts List:
2 x Blue 2mm LED 780mcd Tower Type Diffused. Resistor for 5VDC: 91Ω. Typical Forward Current: 20mA https://www.jaycar.com.au/blue2mmle...
2" LCD
30AWG Kynar wire https://www.jaycar.com.au/bluewirew...
0603 SMD LED's
2 x 150ohms resistors, 1 x 120ohms resistor
60/40 Solder
Premium matte white vinyl, with air release channels
Crafters Choice Square Acrylic Blank 4 Pack Clear https://www.spotlightstores.com/craft...
Kapton tape
Blue plastic film
Black electrical tape
Tesa double sided tape

Tools:
Hakko FX888D Soldering Iron
Phillips Head #0 Screwdriver
Torx T8 security screwdriver
Andonstar ADSM302 Microscope
Silhouette Cameo 4 cutting machine
Ozito Heat Gun https://www.bunnings.com.au/ozito200...
Custom fume extractor    • DIY Soldering Fume Extractor using a ...  
Tec 30512 hot glue gun
Goot Wick desoldering braid 3.0mm & 1.5mm
KingBo RMA218 Flux
ChemTools 99.8% Isopropyl Alcohol
Digitech QM1517 Multimeter
Dick Smith Precision Pliers
1500 Grit Sandpaper
Sharpie black oil based marker
Precision cutting blade
Calipers