This video is about how I made a lightweight(55 grams) RC airplane. The airplane is made of carbon fibre, depron and 3D printed parts. It measures 80 cm in wingspan and is 65 cm long.
It has three channels: motor, elevator and rudder.

#BR1103B

Contents of this video:

00:00 Flying
01:30 Intro
03:12 Overview
05:43 Electronics
09:36 3D printed parts
12:08 Outro


Materials used:

Affiliate links:
Square carbon fibre rod (fuselage): https://hobbyking.com/en_us/carbonfi...
Carbon fibre push rods: https://hobbyking.com/en_us/carbonfi...
Servos: https://hobbyking.com/en_us/hk5320u...
Glue: https://hobbyking.com/en_us/uhuporg...
Battery (200 mah version): https://hobbyking.com/en_us/turnigyn...



Non affiliate links:
First, if you are in Denmark like me, you need a VPN to access Banggood, since it is currently blocked. I am using https://www.cyberghostvpn.com/

ESC: https://www.banggood.com/DP3ABrushl...
RX: https://www.banggood.com/2_4G8CHMin...
Motor (10000 kv version): https://www.banggood.com/RacerstarRa...
Propeller: https://www.banggood.com/2PairsiFlig...
TX: https://www.banggood.com/FrSkyTarani...
3D printer: https://www.banggood.com/Creality3D...
Filament: https://www.banggood.com/CCTREE1_75m...
Depron: https://www.rcleo.com/product/2688218...