This is the seventh in a series of videos I’m going to produce to document the building of my Trumpeter 1:200 model Titanic. In this episode I cover the painting of my hull. Tricky little job, and I use little mildly here!

Hopefully this gives some tips on how, or how not to pain a hull! I am delighted with the result but I do suggest a few things that I would do differently at the end which may be worth looking at.

One other thing, my videos may start to slow down a bit because im moving house! So sorry for this, I'll try and keep them going as best I can but I have a lot of decorating to do!

It’s taken months to work out how I am going to build this, and I have quite a lot left to do.
It’s just a hobby for me so don’t expect videos every other day.

This isn’t really a how to guide, it’s just my way of building things. If some of you get some ideas from it that's brilliant, but equally if you have any suggestions, I’m all ears.

List of parts used:
Red Oxide Primer: https://www.wonderlandmodels.com/prod...

White Primer: https://www.wonderlandmodels.com/prod...

White Paint: https://www.wonderlandmodels.com/prod...

Black Paint: https://www.wonderlandmodels.com/prod...

Sheerline Yellow: https://www.wonderlandmodels.com/prod...

NATO Black: https://www.wonderlandmodels.com/prod...

Tamiya 10mm Masking Tape: https://www.wonderlandmodels.com/prod...

Isopropyl Alcohol for cleaning (you can get this everywhere).


Music:
https://www.bensound.com/royaltyfree...
Success by Mixaund mixaund.bandcamp.com
Fresh Fallen Snow Chris Haugen