This video is part three of a five part series on setting up the brand new Radiomaster Nexus FBL. I'll be joined by OMP Team Pilot Rob Burrow to walk you through how to setup geometry on your Rotorflight equipped helicopter.
Part 1: RotorFlight
Part 2: EdgeTX
Part 3: Geometry
Part 4: Motor Setup
Part 5: Advanced Setup
PRODUCT [AFFILIATE] LINKS
► Radiomaster Nexus FBL: https://www.radiomasterrc.com/product...
► Radiomaster RP3H Rx: https://www.radiomasterrc.com/product...
REFERENCE LINKS
► RotorFlight Configurator: https://github.com/rotorflight/rotorf...
► ELRS Telemetry Reuse Guide: https://www.rotorflight.org/docs/Tuto...
► RotorFlight Discord: / discord
► RotorFlight Setup Guide: https://www.rotorflight.org/docs/Tuto...
► Telemetry Reuse Commands: https://www.rotorflight.org/docs/Tuto...
00:00 Intro
03:22 Wiring
04:22 Disconnect Servos
05:38 Lower Calibrations
06:25 Configure Servos
07:32 Set Arms to 90°
12:06 Set Servo Direction
13:37 Set Servo Endpoints
15:29 Level Swashplate
17:54 Center Tail
19:16 Geometry Correction
20:52 Main Rotor Settings
21:09 Verify Control Movement
23:10 Verify Tail Movement
24:56 Cyclic Calibration
28:33 Collective Calibration
29:07 Collective Geometry Correction
30:44 Cyclic and Collective Limits
35:37 Swash Plate Trims
36:10 Tail Geometry
42:17 Tail Limits
RCVR MERCH and PRODUCT LINKS If you use my affiliate links, the channel will receive a small commission. These links cost you nothing extra to use.
► RCVR1 Orange https://www.etsy.com/listing/16830707...
► RCVR1 Black https://www.etsy.com/listing/16808499...
► RCVR2 https://www.etsy.com/listing/14977817...
► NEW Merch Store: https://rcvr.myspreadshop.com/
RCVR CHANNEL LINKS
► Support the work I do here on Patreon: / rcvideoreviews
► Discord Hang out with the RCVR Crew: / discord
► EdgeTX Fest 2024: https://edgetx.org/fest2024/
#rcvideoreviews #nexus #rotorflight #radiomaster