[IMPORTANT PLEASE READ] Depending on when your bike was manufactured, you might still receive an ebike with a quick release axle, in which case use the instruction found in this video and your owners manual. If you received an ebike with a bolton axle, follow the installation steps in the link below, in place of the front wheel installation steps described in the assembly video and your Owner’s Manual. All ebikes come with Quick Release skewer to secure the fork protector plate during shipping, but it will not be required for assembly if you have a bolton axle.
This link will also help you determine which type of axle is on your front wheel if you are unsure: https://support.radpowerbikes.com/Mai...


Follow these instructions to assemble the RadRover 6 Plus and the RadRover 6 Plus StepThru. Be sure to perform all safety checks in the owner’s manual including a handlebar twist test, ensuring the front wheel is properly secured, and that all parts are tightened and torqued properly.

Assembly Sections:
00:00 RadRover 6 Plus Unboxing
00:58 Included Hardware and Tools
01:25 Recommended Tools
01:42 Unpack the Bike
02:31 Install Handlebar
03:44 Install the Front Wheel
05:36 Adjust the Bash Guard
06:08 Check Chain Alignment
06:28 Install the Front Fender and Headlight
08:23 Install the Rear Fender
08:55 Install Pedals
09:55 Inflate Tires
10:10 Adjust Seatpost
11:46 Perform a Handlebar Twist Test
13:35 Adjust the angle of the RAD UI Display and UI Remote
13:54 Adjust angle of the brake levers
14:22 Connect the Display Connector or Take Battery Out of Ship Mode
15:03 Final Steps/Additional Resources

Download the latest version of your owner’s manual at https://www.radpowerbikes.com/manual

Get help from a local, reputable bike shop if needed, and contact Rad Power Bikes Product Support if you have any questions.
https://www.radpowerbikes.com/help

Radpowerbikes.com
Artlist Music License Number:
300304