This is Ransoto/ Anodizing exhaust installation for the Yamaha MT 07, FZ 07. Or as some would call it... the MT 07 FZ 07 Amazon exhaust.

You’ll see a complete walkthrough, an overview of the exhaust, and sound clips once everything is installed.

This exhaust was purchased on Ebay for less than $200 shipped. You can get the same Ransoto/Anodizing exhaust from Amazon here... https://amzn.to/3fkJbe8.'>https://amzn.to/3fkJbe8. If that link doesn't work, or it's out of stock, you can find what looks to be the same exhaust here...https://amzn.to/3DH5s4n or here... https://amzn.to/3RzVcAR.'>https://amzn.to/3RzVcAR. **Just note that these last two links are not something guaranteed to be the EXACT same exhaust. But all the parts look the same.


**Video Update** The "white" bracket that holds the exhaust is actually covered with a "white" plastic covering. So make sure to remove that.

The ECU was not flashed when this video was posted. It has since been flashed by 2 Wheel Dyno Works.

==============
Parts/ Equipment
==============
Exhaust https://amzn.to/3fkJbe8
*If exhaust is out of stock try here https://amzn.to/3DH5s4n (may not be exact match)
*Try here as well https://amzn.to/3RzVcAR (may not be EXACT match)
Header Gaskets https://amzn.to/3g04ZwJ
Copper RTV Sealant https://amzn.to/3g0bYFY
Anti Seize https://amzn.to/3dOTzu2
Universal Socket Joint Set https://amzn.to/3dXI0Rf

====================
Installation Breakdown
====================
00:00 Intro
00:03 Side plate removal
00:17 O2 Sensor plug removal
00:47 Actual O2 Sensor removal
01:02 Rearset removal and zip tie
01:32 Stock exhaust bolt loosen (right side)
01:43 Stock exhaust bolt loosen and removal (left side)
02:02 Header bolts loosen and removal
02:32 Stock exhaust bolt removal (right side)
02:41 Actual Stock exhaust removal
02:46 Gasket removal
02:55 Stock exhaust bracket removal (right side)
03:06 Ransoto/Anodizing exhaust unboxing
04:11 New gaskets and installation
04:24 New header (pipes) installation
04:34 Ransoto/Anodizing exhaust bracket installation
05:15 Exhaust silencer overview and copper gasket sealer application
05:40 Exhaust silencer installation onto header
05:54 How to install springs
06:20 Silencer clamp installation
06:53 tighten headers and silencer clamp
07:03 Reinstall 02 sensor and O2 sensor plug
07:22 Rubbing alcohol application
07:29 Check for leaks
07:49 Reinstall rearset
07:59 Reinstall side panel
08:15 Stock exhaust sound (cold start)
08:28 Ransoto/Anodizing exhaust sound with baffle
09:03 Ransoto/Anodizing exhaust sound without baffle
09:41 Stock vs. Ranstoto exhaust sound comparison
10:23 Closing