Check out the Red Magic 9 Pro High Performance Gaming Smartphone here! Thanks for sponsoring today's Video! The Chill That Never Quits: https://bit.ly/3y6VIk6

Upgrade your workspace like mine with the FlexiSpot E7Q standing desk I absolutely recommend it! Use code “24BDYTB50” for $50 off check out FlexiSpot for more deals.
FlexiSpot E7Q Standing Desk*: https://bit.ly/4en0ryY (US) https://bit.ly/4cjcJq5 (CAN)


Rat Rig has just launched a major iteration of their trusted VCore platform – the highly anticipated VCore 4.
This doityourself printer promises to improve, to evolve, and to innovate.
I pushed the enormous 500 to its limits with a series of tests, and yes – Rat Rig delivers!
Even more: It's still underrated: Hybrid truly is next level for CoreXY! Being faster at same print quality! Lean back, stay tuned, and learn more about the Rat Rig VCore 4!


Rat Rig VCore 4*

Main Page https://vcore4.ratrig.com/
Rat Rig at Fabreeko https://bit.ly/FabreekoVC4


Check out these recommended channels for more VCore 4 content:

   / @jantec3d  
   / @mandicreally  
   / @modbotarmy  


Videos Mentioned*:

CNC Kitchen Flow Rate Test    • Easy Hotend Benchmark for FAST PRINTI...  
Mikkel Schmidt's SpeedBoat    • 4:25 #SpeedBoatRace on Stock 400mm V...  
Helge's Dev Video on VCore 4 IDEX    • RatRig VVore 4 IDEX  Development Vi...  


Further Links*:

247SpeedTestTool https://derdackel.gitlab.io/247gcode/
CR3D ABS FibCR20 (ABS GF) https://bit.ly/FIBCR20
Hulk Model 2015 scan https://www.thingiverse.com/thing:993933
Eifel Tower Model https://www.printables.com/model/572...
PTFE Strain Relieve STEP/STL LINK TODO
Reverse Bowden STEP/STL LINK TODO


Table of Contents*

0:00 Intro and Sponsor
1:57 VCore 4 in a Nutshell
3:20 Electronics and Panels
4:13 Setup of my VCore 4 500
6:03 Printbed and Heat Up Times
7:59 Toolhead
9:03 Motion System and Hybrid CoreXY Tested
13:16 Flow Rate Tests
15:00 First Layer Problems and Solutions
16:16 Rapido 2 UHF Flaws + Eiffel Tower Print
17:43 Filament Feeding Flaws + Big Hulk Print
19:12 Chamber Heat Up Test and ABS GF Print
19:54 Negatives and Conclusion

*can be affiliate links