In this video I created a suncatcher by using two coaster molds of a bee and honeycomb. I also used a soap mold of a flower for the center. I started by pouring Let's Resin 1:1 casting resin mixed with Let's Resin black mica powder into the coaster molds as these molds are a trivetbased mold, so they are just an outline. For the flower mold I dropped Lets Resin dye inks in the colors of yellow, orange, purple and peach red in and around the petals of the flower and then poured clear resin into the mold (like a dirty pour in reverse). Once cured, demolded and then mixed up more resin and decanted into 4 40 ml pots and I mixed up a yellow, sky blue, orange and yellow and then one clear with marabou rainbow alcohol ink. I poured all the colors into the open areas of the molds, once cured I top coated all the pieces with Istoyo UV resin. I drilled a hole in the top and bottom of each piece and then added a large jump ring in each hole, then I added a smaller jump ring to connect all the pieces together. for the crystal tail I used 3 small crystal bead, 3 medium AB beads with bead tops and then a crystal ball on the end and tied that to the bottom of the suncatcher. #resin #resinart
_________________________________________________________________________
LINKS TO PRODUCTS USED IN THIS VIDEO:

RESIN:
https://a.co/d/av9dhNY
MOLDS:
https://a.co/d/i0FWmrL
https://a.co/d/5NhhHL4
RESIN DYE:
https://a.co/d/a7Hz5pc
UV RESIN:
https://a.co/d/bzjnBcy
CRYSTALS:
https://a.co/d/7B4VrEO