Get yours : https://www.turbinesrc.com/fr/jetse...

⚠⚠⚠ ⚠ My maiden and 2nd flight have been made at CG 190mm !!!! I’ve made a mistake for the starting point


You can do some mod thanks to this video from ‪@Airguardian‬    • Freewing Su35 Build and Mods by RC4e...  



Hi folks

Thank you for watching this video and don't forget to subscribe so you don't miss anything (it's free but it helps content creators a lot)

If you want to help me to expand my squadron or buy a specific plane to review, you can help me by making a small donation via my PayPal link https://www.paypal.me/arthurjanin?loc...'>https://www.paypal.me/arthurjanin?loc...

Thank you very much in advance my friends






Salut les copains

Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus)

Si vous voulez m’aider à agrandir mon escadron ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal https://www.paypal.me/arthurjanin?loc...'>https://www.paypal.me/arthurjanin?loc...

Merci beaucoup beaucoup d’avance les amis




Follow me on Instagram :   / arthuraerorc  
⏰ TikTok : https://vm.tiktok.com/ZMNYCqUhC/


You can buy my things here ⬇

Jeti DS16, sensors, Rx ➡ https://www.opaleparamodels.com/fr/
CNHL LiPo ➡ https://chinahobbyline.com/?ref=I5Ew9...
✈ Jets and more ➡ https://www.turbinesrc.com/fr/?aff=4



0:00 Intro
0:12 Presentation (LiPo CNHL 4000 70c)
1:12 Callouts Modifications video ‪@RC4ever‬ ‪@Airguardian‬
1:37 Rates check
2:45 Takeoff SCARY (too much throws)
3:30 Gyro ON (to tame down!)
3:59 Only 20% elevator (low rates)
4:12 Gear issue!
4:51 Full power cimb to flatspin (no TV)
5:35 PERFECT Landing!
6:02 Post flight discusion (Wow what a beast )
6:25 Nose Gear door removed!
7:43 3.90v for 3m flight
7:55 Too much emotion
8:32 THANKS FOR SUBSCRIBING
9:00 Photos, LiPo placement CNHL




◻⚪ Freewing Sukhoï Su35 (FlankerE Gray Camo) Twin High Performance 70mm EDF Thrust Vectoring Jet ➡ https://www.turbinesrc.com/fr/jetse...

Specifications :
Wingspan : 1080mm / length : 1630mm
Weight : 2600gr empty.
with HRB 6S 4000 60C 3200gr (CG 190mm : centered in LiPo bay) / CNHL 6S 4000 70C 3290gr (CG 190mm : 30mm in front of back wall lipo bay) / HRB 6S 5000 50C 3345gr (CG 190mm : all the way back) but felt too heavy to do crazy aerobatics

2x Brushless powerful 29522100Kv inrunner motors
2x 70mm EDF 12 Blades : THRUST 4300gr !!!!!
2x 60A Hobbywing, EC5 connector
EPS Foam
Nylon hinges on all control surfaces

⚖ Book’s CG 145155mm gear down from wing root leading edge but thanks to ‪@RC4ever‬ CG 165170mm is better for aerobatics !!!!
I’ve made a mistake on measurements so my CG is 190mm it’s not a newbie CG !!!!

⚠ My maiden and 2nd flight have been made at CG 190mm !!!! I’ve made a mistake for the starting point




My Rates (neutral elevator is at 4mm from top of glued vertical tail fin with CG 190mm) : low / mid / high (tailerons are mixed 100% with ailerons):

Ailerons inner side : 40% (12mm) / 60% (18mm) / 100% (30mm), Tailerons have the same % giving huge throws!
Elevator (measures leading edge) : 20% (15mm) / 50% (45mm) / max I can get (57mm)
Rudder : 30% (15mm) / 60% (25mm) / 100% (40mm)
Thrust vectoring nozzles mixed 100%
No flaperons (not enough channels)




⏰ Flights with timers and voltage (checked few minutes after landing):
1st CG190mm : CNHL 6S 4000 70C : 3m flight (2m45 motor) 3.92v
2nd CG190mm : HRB 6S 4000 60C : 3m30 flight (2m52 motor) 3.82v
3rd CG190mm : HRB 6S 5000 50C (felt too heavy for me) : 4m30 flight hard aerobatics (3m52 motor) 3.80v





#maiden #rcplane #su35 #freewing #jet #jeti #opale #radiocontrol #setup #modellbau #eflite #new #thrustvectoring #perfect #foam #crash #scary #aerobatics #flatspin #russia