B3D10 | Siemens NX 2206 Tutorial Drafting | Using a sketch as a boundary, you can cut a section of a view.
You define an endoscope, so to speak, which you push into your part or assembly to emphasise important details.
The three examples (Break out section view in a part, in an assembly, in an isometrically aligned assembly) show you typical working methods, but also typical problems and their solutions.

▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX stepbystep from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here:    • Siemens NX Tutorial | Modeling for be...  
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on YouTube. (and about your subscription ;)
   / @learnnx  

▬about our free learning platform▬▬
All tutorials, clearly arranged, can be found here: https://learnnx.com'>https://learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search for commands or topics.
And all according to the motto: step by step / for free / for all

▬Links▬▬▬▬▬▬▬▬▬▬▬▬▬
https://learnnx.com'>https://learnnx.com/downloads

▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Foreword
00:00:37 Define boundary
00:02:15 Breakout section view
00:03:49 Change breakout section view
00:05:44 Break out section view in assembly draw
00:08:50 Breakout section view in isometric view
00:12:57 Conclusion
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

► visit us on https://learnnx.com'>https://learnnx.com

#learnNX #SiemensNXfreeCourse