00:12 Intro
01:47 Assemble, Setup
03:30 Test Print: XYZ Calibration cube and 3D Benchy with Creality PLA
04:30 Test Print: Spiderman with $13 Eryone PLA
05:54 Test Print: Chrysler building and Eiffel tower with Eryone rainbow silk PLA
07:32 Test Print: Shelf bracket with Overture ABS
08:07 Test Print: Blink Sync module mount with $12 Eryone PETG and Polymaker ASA
08:41 Test Print: Doorstop with Eryone TPU
09:05 Test Print: Bimetal heat break upgrade to print Nylon Carbon Fiber and Glass Fiber
12:45 Pros and Cons
15:27 Conclusions
Welcome back to Aurora Tech Channel. When I first received the review request from Sovol, I thought it was just a cheaper version of the Ender5 Pro that cost $299. However, surprisingly, instead of removing features from the Ender5 Pro, this Sovol SV05 actually added more features and made some improvements. Let’s take a look at what these 2 machines have in common. They both have the same extra sturdy box frame, the print bed moves up and down to work as the Zaxis, and the Yaxis is controlled by one stepper motor and uses a dual shaft. They both come with a classic LCD screen, mechanical limit switches, a single Zaxis, the same Creality V4.2.2 motherboard, and the same spool holder, as well as other small parts.
The Sovol SV05 added a Creality CRtouch auto bed leveling sensor, replaced the Bowden setup with a direct extruder, and added an antibacklash springloaded nut on the Zaxis. There are also 2 arms made by injection molding to provide better support for the print bed. Besides that, there are some improvements in cable management and the location of the screen. It looks like these are the upgrades that most Ender5 users wanted to be added to the printer, so this $299 SV05 looks pretty good to me in value. I would like to thank Sovol for sending me this machine to review, and with that, let’s get started.
Affiliate links:
Buy Sovol SV05 from Sovol official website:
https://bit.ly/3B8CtED
****************************************************
Allmetal hotend upgrade: (updated on 9/16/2022)
****************************************************
Sovol Bimetal heat break for SV01 Pro/SV04/SV05:
https://bit.ly/3U9CrF7
Besides the Bimetal heat break, if you are going to print hightemperature filament frequently, upgrade to a copper heater block and a higher quality thermistor is HIGHLY recommended, I finally spent another $40 to upgrade all of them:
NTC100k Thermistor:
https://amzn.to/3RKWoAy
V6 Hightemperature Copper heater block (fit with the NTC100k thermistor and Sovol Bimetal heat break):
https://amzn.to/3S0Xg3J
V6 hardened steel nozzle (fit with the copper heater block):
https://amzn.to/3BNyYFn
****************************************************
Allmetal hotend upgrade: (updated on 9/16/2022)
****************************************************
Filaments used in this video:
Eryone filament (as low as $10 per roll, min 10 rolls)
PLA, PETG, ABS, ASA, TPU:
https://auroratechchannel.com/links/e...
QIDI PA12CF Nylon Carbon Fiber filament (1kg) $99
https://amzn.to/3cPiEK6
Polymaker PA6GF Glass Fiber Nylon Filament
https://amzn.to/38V4TYt
Other accessories:
Comgrow Smoke Purifier:
https://bit.ly/3BWBkls
Creality Refurbished Printers (SAVE UP TO 50%):
https://bit.ly/3q17mGi
Used Ender3 ($79):
Maybe in bad condition, but if you know how to fix some common issues of a 3D printer and have spare parts to replace by yourself, that could be an amazing deal:
https://bit.ly/3LPnzHw