In this video we assemble a Spyker 80lb Push Broadcast Spreader. The steps in this video apply to models ErgoPro 80lb. Stainless Steel Frame Broadcast Spreader SPY801S
and SPY801P ErgoPro 80lb Powder Coat Broadcast Spreader SPY801P

00:00 — Intro
00:18 — Tools Required
00:28 — Snip Plastic Ties
00:41 — Step 1: Empty Box
01:11 — Hardware Identifier
01:20 — Step 2: Adding the Drive Wheel
01:53 — Step 3: Adding the Idle Wheel
02:26 — Step 4: Adding the Stand
03:00 — Carefully turn spreader over
03:05 — Step 5: Adding the Handle
03:58 — Step 6: Adding the Last Handle Bolts
04:40 — Step 7: Adding the Handle Weldment
05:11 — Step 8: Setting the Handle Height
06:10 — Step 9: Adding the Control Lever Stop
06:56 — Step 10: Adding the Linkage Bar
07:10 — Step 11: Adding the Linkage Guide
07: 17 — Step 12: Securing the Linkage Guide
07:34 — Step 13: Adding the Control Lever
08:08 — Step 14: Checking the Rate Gate
08:21 — Step 15: Adjusting the Rate Gate
09:04 — Step 16: Tightening the Bolts
09:21 — Step 17: Checking the Accuway™
09:48 — Step 18: Screen and Cover
10:14 — Spyker Customer Service: 8009726130