Step Motor driver/controller with IR remote control, for 2 phase, 4 wire NEMA 14, 17 and small Can Stack motors.
Can be used to control higher power Drivers.
NOTE: Does NOT Retain Settings when Power Removed
Default: Speed Level "5" Motor "OFF"
Power: 5VDC ~300mA
IR Remote and/or Onboard switches control Speed & Direction
9 Level speed control.
LED Display for speed level.
Forward & Reverse Buttons
Press once, Motor Runs Press Again Motor Stops.
Recommend a 35V 4 wire Stepper
Will drive higher power motors depending on torque Load.
7in Pigtail Leads