TFT DISPLAY SETTINGS.

pre program settings means allowing the rider to customize the settings depends on demand performance of their electric scooter.

This video is important specially if you are beginners, this video will guide you to understand the proper settings and how to operate the tft display correctly.

TFT display means thin film transistor

This type of display will give you a full details of information and status of your electric scooter.

first lets talk about the parts:
this is the TFT DISPLAY the TFT DISPLAY CONTROL BUTTON the NFC switch and the nfc card..

To turn on the tft display
first you need to TAP the NFC card to the NFC switch. you will heart a beep sounds.
wait for the nfc card twice beep then press the power button.

In TFT DISPLAY CONTROL BUTTON you will see the power button,M or mode button + or up button and minus or down button.

In TFT display once you turn on you will see
at the upper part is
BATTERY PERCENTAGE
BATTERY VOLTAGE
MOTOR INDICATION like single or dual motor
Clock information

in the middle part you will see the
MOTOR POWER INDICATOR
SPEEDOMETER
SPEED INDICATION km/h or mph
Gear LEVEL INDICATOR from ECO mode to gear level 15

at the down part you will see the
MOTOR STATUS on or off
Controller Current indicator
ERROR CODE indicator
TEMPERATURE indicator.

Once you press the mode button LETTER M here in tft display button control
the lower part of display will change to
MILEAGE Information.
Total mileage:
Trip

once you press the break lever the red color will appear this is for brake sensor.

once you long press the plus button the green light color will appear. this means headlight is on and the light level of display will change.

once you long press the plus and minus button together the AVERAGE SPEED / MAX SPEED / TRIP and TIME will be reset but not the total MILEAGE of your scooter.

Lets proceed to parameters settings:

PRESS letter M Twice and in this you will see the
LCD BRIGHTNESS
UNIT SYSTEM
AUTO OFF
CLOCK
START PASSWORD
INFORMATION
ADVANCE SETTINGS
FACTORY SETTINGS
WHEEL DIAMETER
VOLTAGE
EXIT

LCD BRIGHTNESS LEVEL 15 To select just press M or Power button to cancel then Plus or minus button to adjust the parameters.

UNIT SYSTEM: usually we are using KMPH but in other country like US or europeans they are using Mph to change Press then press plus or minus once you comfirm the adjustment press M then exit

AUTO off : this settings will automatically turn off your electric scooter once you didn’t use or you forgot to switch off the display. default time is 10 mins. if you want to change Press M the up or down then press M to comfim then press power button to exit.

Clock press M the press up and down the input correct time then press exit

start password : in this if you want more safety you can input the password so that no one can change the settings or can use you electric scooter.

information in this you will see the
AVRAGE SPEED
MAX SPEED
TRIP
ODO
HARDWARE VERSION
SOFTWARE VERSION
then exit

advance settings in advance settings once you press the M button it will ask the password. enter your password, the default password you will see in manual of your electric scooter. so after you enter it will show
SPEED LIMIT 100%

CRUISE MODE on or off
in this cruise control mode is advisable only in open area or long distance travel.
but do not turn on in crowded areas or uphill rides this will burn your controller

and in main display you will see the cruise control indicator once it turn on

ABS OFF or ON in this i would suggest off

SPEED MAGNET the standard motor magnet is 30
ASSIST PARAMETER
in this if you want to adjust the power or performance of your scooter depends on gear level like gear 1 this is performance
until gear 5

EXPORT when the switch is on the speed is limited to 25% and non zero start

Temperature protection

ZERO START OR KICK START.
in this i would suggest if beginners use kick start. because this electric scooter has a high torque power. for your safety.
#teverun #TFT