Hey woodworkers! I'm starting to design some custom furniture, and this is my first piece: a corner cabinet! I used my CNC machine to cut out a lot of the joinery (mortise and tenon), and also do some of the complex curves. But, I decided to through in some floating tenons (aka: Festool Domino's), biscuits, and pocket hole screws. A little bit of everything...even using my hand plane for a bit. This cabinet could be made without all these fancy tools, it would just take some more time and layout. And cutting some of the joinery on the CNC may not have been faster than simply setting up a dado stack on the table saw. Still, it is fun to investigate what the CNC is capable of doing.

Download this file (for free): https://www.corbinsworkshop.com/shop/...

  / corbincncwoodworking   Corbin's CNC Woodworking Group on Facebook!

I include my PDF "plans" for it, but they are very rough, and are just what I used to build it. However, I would frequently reference the CAD file when I needed to double check something. The file is Fusion 360, and includes several variations that I did for different styles and designs I was considering.

* Finish Osmo: https://amzn.to/49o8iZW
* White pads: https://amzn.to/49lmUcN
* Toe Clamp Hold downs to 3d print: https://www.corbinsworkshop.com/shop/...
* Cam Clamps for 3D printing: https://www.corbinsworkshop.com/shop/...
* 1/4 downcut bit: https://amzn.to/3RQ1FIj
* 3/8 downcut bit: https://amzn.to/3HeohgK (roughing pass on shape)
* 1/4" ballnose (Link TBD mine was from 2L Inc)

The clamp stands:
* My 3d printable clamp stand design: https://www.corbinsworkshop.com/shop/...
* Or purchase premade ones from: https://www.feldthousefamilywoodworks...

* Fusion 360 CAD software https://www.autodesk.com/products/fus... you can get a free "hobby license"

My machine is a 4'x8' Avid CNC Pro. https://www.avidcnc.com

My inspiration: George Nakashima for a lot of the vertical slats, and a bit of Japanese architecture in general for the overall shapes and curves.

* Featherboard on thingiverse (not my design): https://www.thingiverse.com/thing:179...

Thanks everyone!
Corbin Dunn

https://www.corbinstreehouse.com // Blog & Website
https://www.corbinsworkshop.com // CNC Files, Products, Woodworking Portfolio

#cncwoodworking #woodworking #cnc

Timestamps:
0:00 Intro
0:18 Cutting Lumber
0:54 Front Corner Stiles
1:21 Other Rails & Stiles
1:37 CNC Joinery
3:47 Door "Handle"
4:01 Center Panels
5:00 Panel Glue Up
5:15 Center Slats
6:48 Panel Glue Ups
7:20 CNC'ing the Top/Shelf/Bottom
7:47 Domino Joinery
8:16 Carcase Glue Up
9:22 Bottom Stand
9:37 Top Pieces / CNC
10:08 Top Glue Up
10:26 Attaching the Bottom
10:40 Attaching The Top Etc
11:16 Fitting the Door
12:34 Top Wood Buttons
12:57 Finishing
13:40 Assembly
14:16 Final Reveal

** some links are amazon affiliate links where I earn a small commission at no cost to you.