Join this channel to get access to perks:
   / @electricianu  

Troubleshooting a nonworking 3way switch can be a reasonably large pain in the rear for any electrician or electrical contractor. In the latest episode of Electrician U, Dustin gives some Journeyman’s tips (well a Master’s tips really!!) that will make the process easier.

⚡MEMBERSHIP⚡
JOIN ELECTRICIAN U become a member and get:
FREE Continuing Education every year
FREE Practice Exams
FREE Monthly Video Courses
FREE Weekly Live InstructorLed Classes
FREE Monthly Educational Newsletter
Premium MembersOnly Content
Private Discord Channel
Monthly MembersOnly Discord Chats
Sign up here https://www.electricianu.com/electric...

MUSIC AND VIDEO:
  / descantmv  

✍ART AND ILLUSTRATION:✍
https://www.daverussoart.com

So, you have a 3way switch that only works from one side when the other switch is in one position or the other. In other words, if one switch is in the up position, the other switch will turn the light(s) on and off. But if you flip that other switch to the down position, the light(s) won’t actuate at all. This generally means that you have the travelers crossed and either the incoming hot or the outgoing switch leg on the wrong screws. A relatively easy fix once you can understand how a 3way works and can visualize the process. PSA always turn the power OFF before working on any electrical installation!
First, put on your troubleshooting/service electrician hat (figuratively of course!). A good tip as you are unscrewing the device and pulling it & the wires out of the box, do it gently and slowly. A nonworking 3way may not be a miswiring issue as the source of your power issues but may in fact be loose wiring connections. If you pull something out to fast, you can change the state of the wiring and end up chasing ghosts! When you do get the device/wires pulled out of the box, check the connections on the device to make sure they are nice and tight. When putting switch/wires back in box, be careful not to pinch wires and make sure the bare ground wire doesn't come into contact with any of the screws on the device (with the exception of the green grounding screw of course!).
You may also want to check the wiring colors attached to the different color device screws. 3way switches have 4 screws. A green one for the ground, a black/dark bronze one for either the incoming hot or the outgoing switch leg, and 2 brass/goldcolored screws for the travelers. Try to keep in mind that you will be bringing IN the power in one switch box and OUT to the fixture in the other box. Either of these locations will generally be done in a single 122 or 142 cable. The travelers (the wiring going in between the switches) will generally be done in a single 123 or 143 cable. So, the cable with the single black wire will go to the black screw on the device and the cable with the red and black wires will go to the brass/goldcolored screws. If you happen to see the single black wire attached to a brasscolored screw, then the travelers are crossed and that will generally be the source of your problem!
Depending on length (either the homerun or the traveler length in between the 2 switches) you may have to run the incoming hot and the travelers in #12 but the final switch leg up to the fixtures can be run in #14 (if it is a 15amp circuit). So, another tip can be to look at wire size. If you look into the switchbox that is being used as the last box before it goes up to the fixture itself, if you see a #14 wire attached to a goldcolored screw, chances are you have something crossed.
In addition to the internal composition of the switches, you may notice that a 3way switch does NOT have an ON/OFF label on the switch. Due to the alternating nature of the switches and being able to actuate from 2 different locations, they will change position each time you go in/out of different doors.
We hope this has been helpful in understanding how a 3way switch works and some of the troubleshooting techniques to correct a nonworking installation. Do you have a topic you would like to see discussed on Electrician U? Leave a comment in the comments section and let us know! please continue to follow Dustin and Electrician U as we are constantly updating our content to assist our followers in becoming the best electricians that they can be.


#electrician #electrical #electricity #troubleshooting #3way #switches #electrical contractor