I picked up this used inverter generator. Was told the only issue was a dirty carburetor, but it would run on partial choke. Could not get it started. Cleaned carburetor and confirmed spark. It needed a long list of things to run again. Unfortunately parts are almost impossible to get for this. I probably could of split this into several videos. Here is what was wrong:

Broken recoil
Broken recoil rope
Tight valves
Broken compression release
Broken primer bulb
Bad fuel
Clogged carburetor
Broken spark plug boot
Missing rubber foot
Broken choke lever

I use Harbor Freight Super Heavy Duty Degreaser in my ultrasonic cleaner https://www.harborfreight.com/1gallo...

Visit My Amazon Store:
https://www.amazon.com/shop/jamescondon

If you want to donate to the channel, you can use the YouTube "Super Thanks" feature or via PayPal: https://www.paypal.com/paypalme/james...

#GeneratorRepair #SmallEngineRepair #SmallEngine #DIY #Fixed #Troubleshooting #HowTo


Will Not Start, Valve Adjustment, Carburetor Rebuild, Primer Bulb, Compression Release, Surging, Recoil Rope Replacement, Spark Plug Boot, Bad Fuel, Fugi Micro, XFSF2000, XGSF2600, XGSF3000, XGSF3700, F4200Ri, F5200Ri, F6200Ri, Lifan Inverter Generator, ESI 1000i, ESI 2000i, ESI 2500iER, ESI 2600iER, ESI 3100iER, Honeywell Inverter Generator, HW1000i, HW2000i, Xplorer Generator, G2500, Magne, Magna 1000, Magna 2700, Magna 3000, Clark, IG1000, IG2200, 2000i, 1000i, Inverter Generator