TwoSided Machining 2 Part 31 Aspire and VCarve For Absolute Beginners
More down here ↓↓↓ Click SHOW MORE!

This is the 31st in a series of videos geared toward the person who has never worked with CAD or CAM in the Vectric Software before.

In this video, we’ll continue our examination of TwoSided Machining in the Vectric software.

This is such an involved subject, even though the project is a simple one, I’m splitting it into two parts. This video will focus on the actual machining of the project, from start to finish. In the previous video, we designed the project, calculated toolpaths, and saved gcode.

I’ve been wanting to make this video for a long time, and the right project finally came along. In this video, I’ll show you how to set up and cut the 2Sided job we designed in the Vectric software last week. We’ll mount an auxiliary spoil board, mount the material, cut the locating dowel holes, then carve the top of the project. We’ll take the material off the spoilboard and drill the locating dowel holes in the spoilboard. We’ll then flip the material and mount it, using our locating dowels. We’ll then carve the bottom side of the project.

As usual, if you have any comments or questions about anything I covered in this video, please put ‘em in the comment section below.

On Sunday, September 29th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!

Here’s a link to the Live Q&A:    • LIVE Q&A #7  TwoSided Machining Part 2  


Thanks for watching!

Link to Dave Gatton’s home page, where you can get information on a Gatton CNC of your own:
http://www.davegatton.com/gattoncnc....

Links to products and supplies used in this project:

Porter Cable 892 Router: https://amzn.to/2nm6lLx

Bosch Upcut Spiral End Mill: https://amzn.to/2mwCaBl

Amana Spectra Coated Downcut Spiral End Mill: https://amzn.to/2lM4EGO

Amana .125 inch Tapered Ball Nose Bit: https://amzn.to/2mhhddD

Bosch 90° VBit: https://amzn.to/2lPXj9i

Minwax Clear Satin Lacquer: https://amzn.to/2msPjv2

Ball 1 Pint Aqua Canning Jars: https://amzn.to/2o1xFz7
__________________________________________________________________________

Link to the Vectric for the Absolute Beginner Playlist:    • Vectric for the Absolute Beginner  

Link to the 3D Modeling for the Absolute Beginner playlist:    • 3D Carving for Beginners  

Link to the VCarving for the Absolute Beginner playlist:    • VCarving for the Absolute Beginner  
__________________________________________________________________________
Get your Official Mark Lindsay CNC Tshirts and coffee mugs here:
http://marklindsaycnc.com/index.php/p...

I’m a proud founding member of the Maker’s Media Network.
Come check us out at: http://makersmedianetwork.com/

marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
https://harnealmedia.com/
__________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com/

Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.

I appreciate your support!

This video is for informational and entertainment purposes only.

#Aspire #VCarvePro #Tutorial #Beginner