0:00 0:45 Introduction ✋
0:45 1:18 How we punch
1:18 1:40 Safety First Protective clothing
1:40 2:36 Explanation of what we're going to do
2:36 4:49 Stage 1 crossing the boards ▶
4:49 9:25 Stage 2 Nails ▶
9:25 9:45 For whom and how does it work?
9:45 12:25 Stage 3 Drill Drills ▶
12:25 14:28 Stage 4 The Biggest Nail ▶
14:28 16:00 Summary
16:00 16:07 End Leave a LAJK SUB and COMMENT! :)

Hi, encouraged by the comments under the first test to make it even more real and see how the sealer works we took matters into our own hands and check it out!

What did we start with?
It's simple, on the bike used we first removed the inner tubes and checked that the tape on the rims was well glued, then screwed in the 44mm valves designed for the tubeless system.
The tyres we received from a spectator were about 3 months old and showed signs of heavy use, so it crossed our minds to use a new set after all, but we took the risk.
We poured 100 ml of Momum Gum Tyre Sealant into each tyre and left the setup ready for 24 hours before filming.
After completing the test on 30 May, we cycled over 300km in mixed conditions and the tyres are still on and performing great which means there is still sealant in the tyres.
Most importantly they are holding pressure, you can continue to ride this set up without stress

Have you had the opportunity to test the sealant ? Share your opinion in the comments .
How did it perform !

The following were used for the video:
Momum Gum Tyre Sealant 200ml
▶ https://www.komonbikes.pl/pol_m_Momum...
Tubeless 44m bike valve kit
▶ https://www.komonbikes.pl/pol_m_Momum...

Instagram:   / komonbikes  
Facebook:   / komonbikes  
Email: [email protected]
Tel 795066503
#tubelesstyre #tubeless #tiresealant