Hi folks

Thank you for watching this video and don't forget to subscribe so you don't miss anything (it's free but it helps content creators a lot)

If you want to help me to expand my squadron or buy a specific plane to review, you can help me by making a small donation via my PayPal link https://www.paypal.me/arthurjanin?loc...'>https://www.paypal.me/arthurjanin?loc...

Thank you very much in advance my friends



Salut les copains

Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus)

Si vous voulez m’aider à agrandir mon escadron ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal https://www.paypal.me/arthurjanin?loc...'>https://www.paypal.me/arthurjanin?loc...

Merci beaucoup beaucoup d’avance les amis




Follow me on Instagram :   / arthuraerorc  
⏰ TikTok : https://vm.tiktok.com/ZMNYCqUhC/


You can buy my things here ⬇

Jeti Rx and DS16 ➡ https://www.opaleparamodels.com/fr/ ‪@OpaleParamodels‬
CNHL LiPo ➡ https://chinahobbyline.com
✈ Jets and more ➡ https://www.turbinesrc.com/fr/?aff=4





FMS 2500mm ASW17 Glider PNP

If efficiency, stability and aerobatic capabilities are what you seek in a glider, look no further than the FMS 2500mm ASW17!

Buy FMS planes (for USA customers) ➡ https://www.fmshobby.com/FeYKZYrJINBwLe

FMS European Dealers (revendeurs FMS Europe) :
FR + BE + NL + LU ➡ https://www.beez2b.com/fr/magasins
DE + CH + AT ➡ https://www.dpowermodellbau.com/dea...


Specifications :
* Motor Predator 3541750KV and ESC 40 A
* Snap together assembly, no glue necessary 
* 2 pieces wing
* Functional flaps
* Folding high efficiency prop 13.5x6’’
* Made of highly durable EPO
* Wingtip + tail skids
* Plastic wing leading edges

* Wingspan: 2500 mm (98.4")
* Length : 1390 mm (54.7")
* Flying weight : 2390g with CNHL 4S 2200 40C (256g)
* Wing load (Charge alaire) : 47,5 g/dm2
* Wing area (Surface alaire) : 50,3 dm2
* Digital metal Servos : 4x 17 g + 2x 9 g
* LiPo 4S 14,8V 22002600 mAh 35C
* JETI REX7 receiver to have a flight mode full span (ailerons to flaps mix) but no gyro at all!


❌ CG 80mm (see LiPo photo)

Rates (my low / book’s low / my high) :
Aileron 10/12/30mm
Elevator ‪7/10/10mm
Rudder 20mm

Flaps (thermal) on a slider : 3/5mm (down 0.5mm elevator compensation)
Butterfly on a slider : flaps 45mm, ailerons +14mm, elevator 5mm
Speed mode with 10% offset down elevator
Thermal mode with 1mm down flaps


⏰ Flights with timers and voltage (checked few minutes after landing):
1st CG 80mm : CNHL 4S 2200 40C : 20m flight (4m50 motor) 3.78v
2nd CG 80mm : CNHL 4S 2200 40C : 16m flight (3m10 motor) 3.89v
3rd CG 80mm : CNHL 4S 2200 40C : 25m flight (3m10 motor) 3.89v
4th aerobatics CG 80mm : CNHL 4S 2200 40C : 15m flight (3m44 motor) 3.86v
5th CG80mm : CNHL 4S 2200 40C : 21m flight (2m45) 3.95v





0:00 Présentation française
0:40 English presentation
1:45 The box
2:28 UNBOXING
3:23 Wings review
5:35 Fuselage
6:49 Rudder assembly
7:17 Horizontal stab Assembly
8:09 Specifications
8:31 Wing spars assembly
9:00 Open canopy / servos wires
10:03 Linkage for tail servos
10:23 Rx installation
12:26 ESC Calibration
14:45 Center Tail Servos
19:35 Assembly Wings
20:27 CG 80mm / LiPo placement
24:34 My Rates
24:44 2400gr weight
25:05 Please Subscribe
25:36 Photos




#glider #rcplane #fms #asw17 #jeti #opale #radiocontrol #setup #modellbau #eflite #new #hsdjets #perfect #foam #crash #freewing #unboxing #assembly