Hello everyone.
I built this belt sander using a simple power tool and junk I found in the workshop. I'm sure you can do the same, or even better!
Work process:
To make a drive roller without using a lathe, I took plywood and a jigsaw.
The plywood is strong enough and is perfect as a drive roller.
I cut the circles of the desired diameter with a jigsaw and glued them together with wood glue. For greater reliability, I pulled these circles with two long selftapping screws.
Then I fixed this workpiece on the motor shaft and using an angle grinder and a chisel, gave a round shape to my workpiece.
I made the driven roller using several bearings and a bolt.
I made the frame of the grinder from a sheet of iron 6 mm thick.
I showed the whole process in the video, I think you will like it!

FRIENDS ATTENTION!

I started a new channel on YouTube.
This channel is all about cooking!
Mostly male food! Everything we like more meat, and without unnecessary troubles!
Please support my endeavor! Follow the link, look at a couple of recipes, I'm sure you'll like it!
Thank you!
   / @maninthekitchen209  

#BeltSander
#DIYProject
#DIY