In this video I will show you a time lapse build of the Venice RC flying wing. The Venice was presented in the March 2022 edition of the German RC magazine FMT.
On the website of the magazine you can order either a laser cut kit, a printed or a digital plan (check detailed links below).

Ordering link for the laser cut kit: https://en.shop.vth.de/bausatz_venice...
Ordering link for the plan: https://en.shop.vth.de/bauplan_venice...
Ordering link for the build instructions: https://shop.vth.de/baubeschreibung_v...

Link to my Venice flight video: coming soon

Specs:
Wingspan: 1125 mm mm
Length: 390 mm
Wing area: 18 dm2
Weight (AUW): 441 g (in my configuration) incl. GPS logger
RC functions: elevator, ailerons, motor

My configuration:
Motor: Multiplex Roxxy C22201330kV NAVY
Prop: Aeronaut CAM Carbon 7×6 with 8mm root
Battery: SLS Quantum 1000mAh 3S1P 11,1V 30C/60C
ESC: Graupner Brushless Control + T 18
Receiver: Graupner GR12 HoTT 2.4 GHz, 6 channel
Servos: 3x KST DS 113MG
Spinner: Aeronaut PräzisionsTurbospinner CoolNose 30/2.0mm

Link to my free STL files:
Dummy Spinner: https://drive.google.com/file/d/1cYPG...
Servo frame: https://drive.google.com/file/d/1Sh4K...
Air inlet scoop: https://drive.google.com/file/d/1Sh4K...
Template for air inlet opening: https://drive.google.com/file/d/1CAxh...

Covering film:
ORACOVER black
ORACOVER orange
ORACOVER Hotmelt Adhesive (960)
ORACOVER Thinner for Hotmelt Adhesive (980)

Paint for fuselage:
Clou Schnellschleifgrund (wood primer)
Dupli Color Platinum black semi gloss
Dupli Color plastic primer (for spinner)

Vinyl:
dcfix glossy black vinyl
dcfix matt white vinyl

Cutting machine:
BROTHER ScanNCut SDX1000

Camera:
Sony HDRCX730

Microphone:
Rode NTUSB