Lorenzo shows you how to wire your speakers to your factory wiring harness, being powered by the head unit's amplifier or an aftermarket Kenwood amplifier. He shows a 2 channel set up and a 4 channel setup!
Video Chapters:
00:00 We get started
00:25 Run Speaker Wires from Amp to Stock Head Unit
01:00 Wire Output of Amp to Wiring Harness
01:15 PreInstall Layout
02:00 Disassemble Harness
02:35 Identify Front Speaker Leads on Harness
03:00 Label Speaker Wires
04:05 Strip Speaker Wires
04:40 Prepare Heat Shrink Tubing
04:55 Identify Positive and Negtive wires to Properly Match
05:10 Solder Front Speaker Connections and add Heat Shrink
06:00 Remote Turn On Lead Do You Need it for Speakers, Amp, or Power Antenna
06:55 Lay Out Harness and Remote Turn On
07:15 Solder Spade Connection to Remote Turn On Lead
07:40 Insulate Unused Wires
08:40 Tape Up Finished 2 Channel Harness Create THarness
09:55 Make 2 Channel Connection to Amplifier
10:25 Connect RCA's from Stereo to Amplifier
10:50 Completed 2 Channel System
11:05 Wire a 4 Channel System Now Adding Rear Speakers
11:35 Disassemble Harness (AGAIN!)
11:45 Disconnect Rear Speaker Connections from Aftermarket Harness
12:00 Strip, Solder, Heat Shrink Rear Speaker Connections
13:20 Set Up New THarness with Tesa Tape
14:08 Make 4 Channel Connections to Amplifier, starting with Rear Speakers First

Parts:
Car Stereo Wiring Harnesses
http://www.qualitymobilevideo.com/car...

Car Stereo Interfaces
http://www.qualitymobilevideo.com/car...

Car Stereos Single Din and Double DIN
http://www.qualitymobilevideo.com/car...

Klein Tools Crimper
http://www.qualitymobilevideo.com/kle...

Tesa 3/4" Cloth Tape
http://www.qualitymobilevideo.com/516...

Visit www.QualityMobileVideo.com for all of your car audio and video needs!

Music by Wake The Wild: www.WakeTheWild.com
Instagram: @qualitymobilevideo
Twitter: @qualitymobilevi
Facebook:   / qualitymobilevideocom292229920826823