🚀🚀 Zcon Twin - Build Overview u0026 Maiden - Awesome FPV Wing
FULL SETUP AND LINKS IN DESCRIPTION BELOW ⬇ ⬇ ⬇ (Click 'SHOW MORE' )
My orange Zcon was showing signs of use and a little abuse over the years, so I decided it was time for a fresh build. It's my favourite plane and I don't want to be without one. When I heard Chris now sells a twin motor version I thought why not, to make it a bit different! Moving with the times I thought it would also be good to go with digital video, as I find myself flying digital way more than analogue these days. I think this is going to be my most flow plane this summer Hopefully the video covers anything you'd want to know, without going into too much small detail. The maiden footage isn't that exciting as I was getting used to the new setup and not taking much risk, but I can't wait to get calmer weather and push this to it's limit and get super low! If I've missed something out please let me know, I try to read and reply to all comments. Thank you for watching and reading this
Contents:
0:00 Intro
0:54 Video Contents
1:27 Differences between single & twin ZCon
2:16 Setup Overview
9:25 An error on maiden day
10:49 Maiden flight footage
Zcon Build video â–º    • Ritewing ZCon  Setup & Build Overvie... Â
CG on the Zcon twin is approx 22.5cm or 9 inches.
Launch Settings all default apart from:
set nav_fw_launch_max_angle = 180
set nav_fw_launch_idle_motor_delay = 7000
set nav_fw_launch_motor_delay = 0
set nav_fw_launch_timeout = 10000
set nav_fw_launch_max_altitude = 8000
set nav_fw_launch_climb_angle = 20
☕ Hey, thanks for watching! If you enjoyed this video or found it useful and would like to show your appreciation/support for my channel, why not buy me a coffee :) ► http://tiny.cc/BuyAdamGaCoffee
Follow me on my Facebook page for updates, build logs, random pictures & vid clips that don't make it to YouTube:   / adamgdoesfpv Â
Follow me on Instagram @adamgdoesfpv â–º http://tiny.cc/AdamGonInstagram
Sites I get my awesome FPV goodies from:
✅ Banggood ► http://tiny.cc/BanggoodFPV
✅ RMRC ► http://tiny.cc/RMRC
✅ AtomRC ► http://tiny.cc/AtomRC (Use coupon 'AdamGdoesFPV' for $10 off)
✅ Amazon ► http://tiny.cc/AmazonFPV
✅ HobbyKing ► http://tiny.cc/HobbyKing
========ZCon Setup========
In the Air:
56" Ritewing ZCon Twin â–º Only available if you email Chris at Ritewing directly: [email protected]
DJI O3 Digital transmitter and Camera â–º http://tiny.cc/DJIO3
Sandisk 256gb V30 Micro SD for onboard 4k60f recording â–º http://tiny.cc/Sandisk256gbV30
2 x TrueRC Singularity antennas on the O3 â–º http://tiny.cc/Singularity72mm
Matek H734 WLITE Flight controller (Running iNav6) â–º http://tiny.cc/MatekH743wlite
2 x Badass 2310 1680kv motor â–º http://tiny.cc/Badass23101680
APC 6x4e and 6x4ep â–º http://tiny.cc/APC6x4
Hitec HS225MG Servos â–º http://tiny.cc/iiww8y
2 x Little Bee 50a BLHeli32 ESC â–º http://tiny.cc/LittleBee50a
Tiny GPS Rx â–º http://tiny.cc/220GPS
TBS Crossfire Nano Rx â–º http://tiny.cc/TBSNanoRx
Prodrone 868 tuned Dipole antenna â–º http://tiny.cc/Tuneddipole868
2 x 4,000mAh 5S in parallel â–º http://tiny.cc/5Slipo
Red COB LED's â–º http://tiny.cc/COBLEDs
On me:
DJI V2 Goggles â–º http://tiny.cc/DJIV2Goggles
TrueRC Omni Stubbies â–º http://tiny.cc/TrueRCStubby
TrueRC X2Air's â–º http://tiny.cc/DJIX2Air
Sandisk 64gb V30 Micro SD for goggle DVR â–º UK Link: http://tiny.cc/SanDiskV30UK USA Link: http://tiny.cc/SanDiskV30USA
TX16s Transmitter â–º http://tiny.cc/RadiomasterTX16s
Crossfire Micro Tx V2 â–º http://tiny.cc/TBSCrossfireTX16s
========3D Printed Parts========
Electronics bay tray â–º https://www.thingiverse.com/thing:600...
Nose to hold DJO O3 â–º https://www.thingiverse.com/thing:600...
Skid â–º http://tiny.cc/Skid
Wall mounting hooks designed specifically for this wing (My design) â–º http://tiny.cc/ZConWallHook
========3D Printing Equipment========
3D Printer â–º http://tiny.cc/FlSunQ5
PLA filament â–º http://tiny.cc/EryonePLA
TPU filament â–º http://tiny.cc/SainsmartTPU
PETG filament â–º http://tiny.cc/SainsmartPETG
Digital Calliper â–º http://tiny.cc/DigitalCalliper
========Build equipment========
E6000 glue â–º http://tiny.cc/E6000Glue
Soldering Iron â–º http://tiny.cc/SolderingIron
Laminating Iron â–º http://tiny.cc/LaminatingIron
Laminate â–º http://tiny.cc/laminate
Hot glue gun â–º http://tiny.cc/HotGlueGun
Foam Cutting Tool â–º http://tiny.cc/vxgv0y
Heat Gun â–º http://tiny.cc/AdjustableHeatGun2000w
Watt Meter â–º http://tiny.cc/WattMeter
3M90 spray adhesive â–º http://tiny.cc/3M90adhesive
